Colombia Geomembrane

Smooth HDPE Geomembrane is manufactured from High Density Polyethylene resin with proportional carbon black antioxidant, anti-aging and UV-resistance materials by the technology of coextrusion-blown triple layer.

Category:

ColombiaSmooth HDPE Geomembrane

Phone:+86 13105487610

Product Description

Introduction

Geomembrane is a type of anti-seepage material used to prevent infiltration and interaction between soil and water bodies. Common geomembrane materials include the following

High density polyethylene (HDPE): HDPE geomembranes have a certain degree of flexibility and toughness, and can resist long-term exposure to ultraviolet radiation and chemical substances. It is widely used and commonly used in situations where there is high humidity or high chemical content on one side of the soil.
Low density polyethylene (LDPE): Low density polyethylene geomembrane has good flexibility and ductility, suitable for lower soil pressure and temperature conditions. It is commonly used in horticulture, agricultural anti-seepage, and drainage projects.
Linear low-density polyethylene (LLDPE): Linear low-density polyethylene geomembrane has good physical properties and impermeability. It is usually used in large-scale projects such as highways, railways, and landfills.

Video Showcase

Applications

Applied to the tasks of Landfill site, bank, dam, storage reservoir, channel, irrigation, highway, railway, tunnel, ingesting tank, salt subject bittern pan, chemical liquid storage, remedy tank, synthetic lake and riverway etc.

Working Drawing

4.High density polypropylene (HDPP): High density polypropylene geomembranes have high tensile strength and impermeability, making them suitable for engineering under high pressure and high temperature environments.

5.Polyvinyl chloride (PVC): Polyvinyl chloride geomembranes have good flexibility and permeability resistance, and are widely used in water bodies, subways, tunnels and other engineering projects.

6.Polyester (PET): Polyester geomembranes have high impermeability and tensile strength, and are commonly used in soil stability, underground engineering, and groundwater protection projects.

Specifications

❶ Thickness: 0.2mm-3.0mm

❷ Width:1-10m

❸ Colour: black, green, blue, yellow

Properties	Test Method	GMSH050	GMSH075	GMSH100	GMSH150	GMSH200
Thickness	ASTM D5199	0.50 mm	0.75 mm	1.00 mm	1.50 mm	2.00 mm
Density	ASTM D1505	0.940 g/co	0.940 g/cc	0.940 g/cc	0.940 q/cc	0.940 g/cc
Tensile Properties
Yield strength	ASTM D6693	7kN/m	11 kN/m	15 kN/m	22 kN/m	29kN/m
Break strength	Type IV	13 kN/m	20 kN/m	27 kN/m	40 kN/m	53 kN/m
Yield elongation		12%	12%	12%	12%	12%
Break elongation		700%	700%	700%	700%	700%
Tear Resistance	ASTM D1004	62 N	93 N	125 N	187 N	249 N
Puncture Resistance	ASTM D4833	160 N	240 N	320 N	480 N	640 N
Stress Crack Resistance	ASTM D5397	500 hrs	500 hrs	500 hrs	500 hrs	500 hrs
m Carbon Black Content	ASTM D1603	2.0%	2.0%	2.0%	2.0%	2.0%
Carbon Black Dispersion	ASTM D5596	For 10 different views:9in Categoriesor 2 and 1 inCategory 3
Oxidative Induction Time (OIT	ASTM D3895	100 min.	100 min.	100 min.	100 min.	100 min.
UV Resistance High Pressure OIT retained after 1600hrs	ASTM D5885	50%	50%	50%	50%	50%
Dimensions
Roll Width (m)		7	7	7	7	7
Roll Length (m		420	280	210	140	105