Colombia Geosynthetics Continuous Filament Spunbond Polyester Non Woven Geotextile Fabric

PET Nonwoven Geotextile is 100% Polyester continuous filament needle punched nonwoven geotextile, fromed by the process of needle punching and thermally bounding. Lin Yuan Geotextile can offer excellent water flow properties for drainage and other applications.

Category:

ColombiaPolyester (PET) Continuous Filament Non-woven Geotextile

Phone:+86 13105487610

Product Description

Introduction

Usually, non woven geotextile refers to needle punched non-woven geotextile made from Polyester or polypropylene brief curing fiber with the diameter of 6D to 12D and size of 54-64mm.
The producing procedure is to opening, carding and cluttering the brief fibers to make them pass with every other, and then lapping to let the fibers normalize entangling, and at final needle punched with excessive speed. It is an wonderful and least expensive answer of separation, filtration, drainage, safety and reinforcement features for engineering projects.

Video Showcase

Applications

For Filtration:When water passes from a fine-grained to a coarse grained layer, Non woven Geotextile can preserve pleasant particles well. For an example, when water flows from a sandy soil into a Geotextile wrapped gravel drain.
For Separation:It can separate two layers of soil with special bodily properties. For an eample, the separation of avenue gravel from smooth sub-base materials.
For Drainage:It can drain liquid or gasoline from the airplane of the fabric, which leads to draining or venting of the soil. For an example, the fuel vent layer in a landfill cap.
For Reinforcement:It can enhance the load bearing potential of a unique soil structure. For an example, the reinforcement of a holding wall.

Working Drawing

Specifications

Properties	Test Method	Unit	PETNW150	PETNW200	PETNW250	PETNW300	PETNW350	PETNW400	PETNW500	PETNW600
Tensile Strength (MD/TD)	ASTM D4595	kN/m	9.5	13	17	19	23	26	34	38
Tensile Elongation (MD/TD)	ASTM D4595	%	50	60	60	60	60	60	60	60
Grab Tensile Strength (MD/TD)	ASTM D4632	N	550	730	1000	1100	1400	1700	2000	2500
Grab Elongation (MD/TD)	ASTM D4632	%	50	50	60	60	60	60	60	60
Trapezoidal Tear Strength (MD/TD)	ASTM D4533	N	270	330	430	450	540	610	770	900
CBR Burst Strength	ASTM D6241	N	1800	2300	2800	3200	3600	4500	6000	7000
Pore Size O90	ASTM D4751	µm	110	110	100	100	90	80	70	70
Water Flow Q100	ASTM D4491	L/m2/s	235	210	190	170	160	125	100	80
U.V. Resistance	ASTM D4355	%@500h	70	70	70	70	70	70	70	70
Thickness	ASTM D5199	mm	1.2	1.6	1.9	2.2	2.5	2.8	3.4	4.2
Weight	ASTM D5261	g/m2	150	200	250	300	350	400	500	600
Roll Width	-	m	6	6	6	6	6	6	6	6
Roll Length	-	m	250	150	150	100	100	100	75	50