sao tome and principe Construction Geosynthetic Material PP HDPE Uniaxial Geogrid Price

HDPE uniaxial geogrid is manufactured from select grades of High Density Polyethylene, from the process of extruding and longitudinal stretching.

Category:

sao tome and principePP/HDPE Uniaxial Geogrid

Phone:+86 13105487610

Product Description

Introduction

Unidirectional geogrids are mainly used for soil reinforcement and reinforcement to prevent soil erosion and soil sliding. Its characteristic is high permeability, which can maintain the soil's permeability and effectively resist soil erosion and erosion.

In practical applications, unidirectional geogrids can be used in engineering such as embankments, roads, railways, reservoirs, etc., to enhance soil stability and prevent soil erosion. It can also be used in environmental protection projects, such as land management, vegetation restoration, and ecological restoration.

Video Showcase

Applications

High tensile strength: Unidirectional geogrids are made of high-strength polypropylene or polyester fiber materials, which have excellent tensile strength and can effectively enhance the stability of the soil.
Good anti-aging performance: Unidirectional geogrids have undergone special treatment and have good anti-aging performance, which can be used for a long time in harsh environmental conditions.
Strong permeability: Unidirectional geogrids have good permeability, which can maintain the soil's permeability and facilitate the infiltration and drainage of surface water.
Anti erosion and erosion: Unidirectional geogrids can effectively resist soil erosion and erosion, protecting the soil from damage.
Good flexibility: Unidirectional geogrids have a certain degree of flexibility and adaptability, which can adapt to the needs of different terrains and landforms.
Convenient construction: Unidirectional geogrids can be cut and shaped according to specific engineering needs, making construction flexible and convenient.

Working Drawing

Specifications

Index Properties	Test Method	Unit	UX60PE	UX80PE	UX90PE	UX120PE	UX130PE	UX160PE	UX170PE	UX180PE
Polymer	-		HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE
Minimum Carbon Black	ASTM D4218	%	2	2	2	2	2	2	2	2
Ultimate Tensile Strength,MD	ASTM D6637	kN/m	60	80	90	120	130	160	170	180
Tensile Strength @2%Strain,MD	ASTM D6637	kN/m	16	21	24	33	38	47	49	52
Tensile Strength @5%Strain,MD	ASTM D6637	kN/m	31	40	45	65	75	93	96	103
Strain@UltimateStrength,MD	ASTM D6637	%	11.5	11.5	11.5	11.5	11.5	11.5	11.5	11.5
Junction Efficiency	GRI GG2-87	%	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D1388	mg-cm	530,000	1,150,000	2.300,000	6,050,000	6,400,000	8,600,000	8,900,000	9,100,000
UV Resistance	ASTM D4355	%	98	98	98	98	98	98	98	98
Minimum Reduction Factor for Installation Damage (RFid)	ASTM D5818	-	1.05	1.05	1.05	1.05	1.05	1.05	1.05	1.05
Reduction Factor for Creep for 120-year Design Life (RFcr)	ASTM D5262	-	2.6	2.6	2.6	2.6	2.6	2.6	2.6	2.6
Roll Width	-	m	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2
Roll Length	-	m	100	50	50	50	50	50	50	50