PRODUCTS CENTER
Papua New Guinea Composite Drainage Net
Category:
Papua New GuineaComposite Drainage Net
Product Description
Introduction
Composite Drainage Net is a new type of drainage geosynthetic product, it is made from three-dimension drainage net bonding to needle punched non woven geotextile by one or two sides. Three dimensional composites drainage network consists of a tri-dimension thick vertical rib, and a inclined rip on the top and bottom. Double sided adhesive seepage geotextiles form a"filtration - drainage - ventilation - ." overall performance, and can replace the traditional sand and gravel.wildly used in erosion control, foundation wall drainage, landfill leakage collection, leakage detection, methane gas collection,pond leak detection, roadway and pavement drainage and other subsurface drainage system applications.
Composite Drainage Mesh is made of high-quality material, which is corrosion-resistant, heat-resistant, pressure-resistant and wear-resistant to ensure that it can maintain good performance during long-time use.
Composite drainage network has a unique design and good drainage performance. Its special structure can effectively remove water, prevent water from damaging roads and other areas, and improve the safety of vehicles and pedestrians.
At the same time, the gap design of the composite drainage network can effectively filter impurities, maintain smooth drainage and reduce the frequency of blockage and cleaning work.
Video Showcase
Applications
Composite Drainage Mesh is a drainage system with excellent performance, widely used in urban roads, car parks, parks, squares and other places.
Working Drawing
![]() |
![]() |
![]() |
Specifications
| Property | unit | BC50/D200 | BC63/D200 | BC70/D200 | BC80/D200 | Test Standard | |
| Geocomposite specification | |||||||
| Hydraulic conductivity(MD) |
M²/s | 2.8×10-3 | 3.2×10-3 | 4.0×10² | 5×10-3 | ASTM D4716 | |
| Puncture | KN/m | 0.17 | 0.17 | 0.17 | 0.17 | ASTM D7005 | |
| Resistance | |||||||
| Core Material Geonet Specification | |||||||
| Thickness | mm | 6.3 | 7.0 | 8.0 | 9.0 | ASTM D5199 | |
| Density | g/cm³ | 0.94 | 0.94 | 0.94 | 0.94 | ASTM D1505 | |
| Carbon Black Content | % | 2 | 2 | 2 | 2 | ASTM D1603 | |
| Tensile strength (MD) | KN/m | 8.0 | 10.0 | 12.0 | 14.0 | ASTM D7179 | |
| Geotextile Specification | |||||||
| Unit weight | g/m2 | 200 | 200 | 200 | 200 | 200 | |
| Geotextile type | Continuous filament non-woven geotextile | ||||||
Pack and Ship
Packaging: Standard packaging or customer's requirements
Lead time: Within 10-15 days after receiving the deposit payment
Producing Capacity: Two 40ft Containers per week
![]() |
![]() |
![]() |
Our Main Products
Contact Us
Address:No. 366, Industrial Park North Road, Beijipo District, High-tech Zone, Taian City, Shandong Province,China
Get a Free Quote





