Papua New Guinea 100-800gsm Geotextile

PET Nonwoven Geotextile is 100% Polyester continuous filament needle punched nonwoven geotextile, fromed by the process of needle punching and thermally bounding. Lin Yuan Geotextile can offer excellent water flow properties for drainage and other applications.

Category:

Papua New GuineaPolyester (PET) Continuous Filament Non-woven Geotextile

Phone:+86 13105487610

Product Description

Introduction

Long filament non-woven geotextile is a type of geotextile made from continuous fibers through non-woven technology. It has certain tensile strength and impermeability, and common uses include:

Soil slope protection: Long filament non-woven geotextile can be used for slope protection and soil erosion prevention. It can serve as a cover on the surface of soil, fixing soil particles, preventing soil from being washed away by wind and water, slowing down the speed of water flow, and preventing slope erosion.

Video Showcase

Applications

In hydraulic engineering, such as riverbed restoration, dam reinforcement, and riverbank protection

Working Drawing

Road reinforcement: Long filament non-woven geotextile can be used for the reinforcement and stability of roads and railways. It can be used as a base or base material to enhance the bearing capacity of the roadbed, prevent roadbed loosening and sinking, and improve the durability and stability of the road.

Hydraulic engineering: Long filament non-woven geotextiles can be used in hydraulic engineering, such as riverbed repair, dam reinforcement, and riverbank protection. It can prevent the erosion of water flow, improve the stability of the structure, and reduce the construction cost of earthworks.

Specifications

Properties	Test Method	Unit	PETNW150	PETNW200	PETNW250	PETNW300	PETNW350	PETNW400	PETNW500	PETNW600
Tensile Strength (MD/TD)	ASTM D4595	kN/m	9.5	13	17	19	23	26	34	38
Tensile Elongation (MD/TD)	ASTM D4595	%	50	60	60	60	60	60	60	60
Grab Tensile Strength (MD/TD)	ASTM D4632	N	550	730	1000	1100	1400	1700	2000	2500
Grab Elongation (MD/TD)	ASTM D4632	%	50	50	60	60	60	60	60	60
Trapezoidal Tear Strength (MD/TD)	ASTM D4533	N	270	330	430	450	540	610	770	900
CBR Burst Strength	ASTM D6241	N	1800	2300	2800	3200	3600	4500	6000	7000
Pore Size O90	ASTM D4751	µm	110	110	100	100	90	80	70	70
Water Flow Q100	ASTM D4491	L/m2/s	235	210	190	170	160	125	100	80
U.V. Resistance	ASTM D4355	%@500h	70	70	70	70	70	70	70	70
Thickness	ASTM D5199	mm	1.2	1.6	1.9	2.2	2.5	2.8	3.4	4.2
Weight	ASTM D5261	g/m2	150	200	250	300	350	400	500	600
Roll Width	-	m	6	6	6	6	6	6	6	6
Roll Length	-	m	250	150	150	100	100	100	75	50