Papua New Guinea PP Uniaxial Plastic Geogrid for Road Reinforcement

HDPE uniaxial geogrid is manufactured from select grades of High Density Polyethylene, from the process of extruding and longitudinal stretching.

Category:

Papua New GuineaPP/HDPE Uniaxial Geogrid

Phone:+86 13105487610

Product Description

Introduction

Uniaxially stretched geogrid is a kind of high-strength geotextile, which is mainly made of high molecular polymer, added with certain anti ultraviolet and anti-aging additives, re oriented and arranged in a linear state through uniaxial stretching, extruded and pressed into thin plates, punched into regular pore networks, and then stretched longitudinally.

Video Showcase

Applications

Road construction: PP Uniaxial Geogrids are commonly used in the construction of roads and highways to enhance the load-bearing capacity of the soil and prevent pavement cracking.
Slope stabilization: These geogrids are effective in stabilizing slopes and preventing soil erosion, providing increased safety and stability to embankments and slopes.
Retaining wall reinforcement: PP Uniaxial Geogrids are used to reinforce the soil behind retaining walls, improving their structural integrity and preventing soil movement.
Landfill and mining applications: These geogrids are also utilized in landfill and mining projects to provide soil reinforcement and prevent soil settlement.

Working Drawing

In this process, the polymer is oriented in a linear state and forms a uniformly distributed, high node strength, long elliptical network overall structure. This structure has a relatively high tensile strength and modulus, reaching 100-200Mpa in tensile strength, which is close to the level of low-carbon steel and greatly superior to traditional or existing reinforced materials. It has a high early tensile strength and modulus (with an elongation of 2-5%) that exceeds international standards. A chain system that provides ideal force bearing and diffusion for the soil.

Specifications

Index Properties	Test Method	Unit	UX60PE	UX80PE	UX90PE	UX120PE	UX130PE	UX160PE	UX170PE	UX180PE
Polymer	-		HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE
Minimum Carbon Black	ASTM D4218	%	2	2	2	2	2	2	2	2
Ultimate Tensile Strength,MD	ASTM D6637	kN/m	60	80	90	120	130	160	170	180
Tensile Strength @2%Strain,MD	ASTM D6637	kN/m	16	21	24	33	38	47	49	52
Tensile Strength @5%Strain,MD	ASTM D6637	kN/m	31	40	45	65	75	93	96	103
Strain@UltimateStrength,MD	ASTM D6637	%	11.5	11.5	11.5	11.5	11.5	11.5	11.5	11.5
Junction Efficiency	GRI GG2-87	%	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D1388	mg-cm	530,000	1,150,000	2.300,000	6,050,000	6,400,000	8,600,000	8,900,000	9,100,000
UV Resistance	ASTM D4355	%	98	98	98	98	98	98	98	98
Minimum Reduction Factor for Installation Damage (RFid)	ASTM D5818	-	1.05	1.05	1.05	1.05	1.05	1.05	1.05	1.05
Reduction Factor for Creep for 120-year Design Life (RFcr)	ASTM D5262	-	2.6	2.6	2.6	2.6	2.6	2.6	2.6	2.6
Roll Width	-	m	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2
Roll Length	-	m	100	50	50	50	50	50	50	50