Papua New Guinea Uniaxial Geogrid Biaxial Geogrid Plastic Grid Polyester Fiberglass Grids for Retaining Wall

HDPE uniaxial geogrid is manufactured from select grades of High Density Polyethylene, from the process of extruding and longitudinal stretching.

Category:

Papua New GuineaPP/HDPE Uniaxial Geogrid

Phone:+86 13105487610

Product Description

Introduction

Uniaxial plastic technical grid is a kind of technical material with high strength that uses high molecular polymer asmain rawmaterial, adds certain ultraviolet proof and aging resistance agent and makes messy chain shape molecules have drectionallayout and from linear status by unidirectional extension. Plastic technical grid makes directional tension undercertain temperature condition according to physical features of high molecule polymer,so its strength is very high in tension direction, tension resistance reaches 100-200Mpa,yield elongation rate is only 4-10%, it is near to the level of low carbon steel and much better than traditional or current reinforcement materials, and is very ideal synthetic material forstrengthening andreinforcement of civil projects.

Video Showcase

Applications

Uniaxial plastic geogrid used to strengthen river and sea embankmentIt can be made into a gabion, and then used together with a grid to prevent the dam from being washed by sea water and cause collapse. The gabion is permeable, can slow down the impact of waves, prolong the life of the dam, save manpower and material resources, and shorten the construction period.
Unidirectional geogrid for cement pavement Geogrid is laid on the bottom of the cement pavement, which can reduce the rut depth, prolong the anti-fatigue life of the pavement, and reduce the thickness of the cement pavement to save costs.

Working Drawing

Specifications

Index Properties	Test Method	Unit	UX60PE	UX80PE	UX90PE	UX120PE	UX130PE	UX160PE	UX170PE	UX180PE
Polymer	-		HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE
Minimum Carbon Black	ASTM D4218	%	2	2	2	2	2	2	2	2
Ultimate Tensile Strength,MD	ASTM D6637	kN/m	60	80	90	120	130	160	170	180
Tensile Strength @2%Strain,MD	ASTM D6637	kN/m	16	21	24	33	38	47	49	52
Tensile Strength @5%Strain,MD	ASTM D6637	kN/m	31	40	45	65	75	93	96	103
Strain@UltimateStrength,MD	ASTM D6637	%	11.5	11.5	11.5	11.5	11.5	11.5	11.5	11.5
Junction Efficiency	GRI GG2-87	%	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D1388	mg-cm	530,000	1,150,000	2.300,000	6,050,000	6,400,000	8,600,000	8,900,000	9,100,000
UV Resistance	ASTM D4355	%	98	98	98	98	98	98	98	98
Minimum Reduction Factor for Installation Damage (RFid)	ASTM D5818	-	1.05	1.05	1.05	1.05	1.05	1.05	1.05	1.05
Reduction Factor for Creep for 120-year Design Life (RFcr)	ASTM D5262	-	2.6	2.6	2.6	2.6	2.6	2.6	2.6	2.6
Roll Width	-	m	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2
Roll Length	-	m	100	50	50	50	50	50	50	50