Papua New Guinea Other Geosynthetics Products Plastic PP Biaxial Geogrid Price for Road Soil Stabilizer

Polyester biaxial geogrid is manufactured from high tenacity multifilament polyester yarns and coated with durable polymer, it is used to stabilize the earth structures, such as road, highway, railway, airport, MSE wall, steep slope and pavement construction.

Category:

Papua New GuineaPP Biaxial Geogrid

Phone:+86 13105487610

Product Description

Introduction

PP Biaxial Geogrid provide omni axial support to granular sub bases and areas of weak or varied soils. These biaxial geogrids ensure any problems with pavements are solved by reinforcing capping layers and railway ballasts. These layers are reinforced with granular particles compacted over the grids, which penetrate and project through the apertures to create a strong interlock. An exceptionally minimal maintenance system the biaxial geotextile is a cost-effective solution for pavement problems.

Video Showcase

Applications

Soil reinforcement: PP bidirectional geogrid can effectively enhance the tensile and shear strength of soil, improve the stability and bearing capacity of soil, and is suitable for road, railway, slope and other land reinforcement projects.
Drainage function: The PP bidirectional geogrid structure is open, making it easy for water to pass through and has good drainage performance. It can prevent the accumulation of water inside the soil layer, reduce soil liquefaction and slope erosion.
Chemical corrosion resistance: PP material itself has excellent chemical corrosion resistance, which can be used for a long time in acidic and alkaline environments and saline water. It is suitable for coastal protection, sewage treatment and other engineering projects.
Easy to install: PP bidirectional geogrid is lightweight, easy to cut, easy and fast to install, saving construction time and cost.
Environmentally friendly: PP material is recyclable and has the characteristics of being non-toxic, odorless, and pollution-free, which will not affect the surrounding environment and ecosystem.

Working Drawing

Specifications

Item	Test Method	Unit	PBX1515		PBX2020		PBX3030		PBX4040		PBX5050
Item	Test Method	Unit	MD	TD	MD	TD	MD	TD	MD	TD	MD	TD
Polymer	-	-	PP
Minimum Carbon Black	ASTM D 4218	%	2
Tensile Strength	ASTM D 6637	kN/m	15	15	20	20	30	30	40	40	50	50
Tensile Strength @ 2% Strain	ASTM D 6637	kN/m	5	5	7	7	10.5	10.5	14	14	17.5	17.5
Tensile Strength @ 5% Strain	ASTM D 6637	kN/m	10.5	10.5	14	14	21	21	28	28	35	35
Elongation	ASTM D 6637	%	13	13	13	13	13	13	13	13	13	13
Junction Efficiency	GRI GG2	%	93	93	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D 7748	mg-cm	250,000		750,000		2,000,000		4,800,000		8,000,000
Aperture Stability	ASTM D 7864	m-N/deg	0.32		0.50		0.75		0.98		1.10
Aperture Size	-	mm	38	38	38	38	36	36	35	35	33	33
Roll Width	-	m	3.95 or 5.95
Roll Length	-	m	50