Brunei 8mm HDPE Composite Dimple Geotextile Drainage Board

Composite Drainage Board is a high-performance drainage material, made of polymer material and special additives.

Category:

BruneiComposite Drainage Board

Phone:+86 13105487610

Product Description

Introduction

HDPE Waterproof Dimpled drainage Sheet composite drainage board is a type of green roofing and foundation driange systems which are drained by a special molding plastic sheets. Water is retained and drained off within dimple on the upper sides of the drainage board; excess water spills over the edges of the plates and is carried off from the roof or foundations.

The plastic or HDPE drainage board are made from HDPE(high-density polyethylene), using high pressure to inject plastic to form hole-lump-shaped shell, with stereo space and support level; in the top of the shell, covering with non-woven as filtering level for water percolation, water storage and water drainage

Video Showcase

Working Drawing

1. Greening project: the garage roof greening, roof garden, vertical greening, roof greening, football pitches, golf course, etc.

2. Municipal engineering: airport, road embankment, subway, tunnel, landfill, etc.

3. Construction: the upper or lower building foundation, inside and outside the basement wall, floor and roof, roof seepage control and heat insulation layer, etc.

4. Water conservancy project: the reservoir seepage water, reservoir, lake water seepage control, etc.

5. Traffic engineering: highway, railway basement, roadbed, dam and slope protection layer, etc.

Specifications

ltem/Model	DB08	DB10	DB12	DB16	DB20	DB25	DB30
Material	HDPE
Dimple Height (mm)	8	10	12	16	20	25	30
Unit Weight (g/m²)	1000	1100	1200	1400	1500	1600	1800
Thickness (mm)	0.7	0.8	0.9	1.0	1.1	1.1	1.2
Tensile Strength (KN/m)	3.5
Compressive Strength (>kpa)	300
Elongation >%	80
Longitudinal Drainage >cm²/s	10	10	10	15	15	20	20
Puncture Strength (KN)	0.35