Papua New Guinea Manufacturer Geosynthetics Smooth HDPE Geomembrane for lrrigation Canals

Smooth HDPE Geomembrane is manufactured from High Density Polyethylene resin with proportional carbon black antioxidant, anti-aging and UV-resistance materials by the technology of coextrusion-blown triple layer.

Category:

Papua New GuineaSmooth HDPE Geomembrane

Phone:+86 13105487610

Product Description

Introduction

Leading producer of HDPE/LDPE/PE/EV/Ecb/PVC Geomembranes. Waterproof, textured, smooth, difficult floor options. Ideal for ponds, landfills, agriculture, dams, lakes, biogas, aquaculture, salt farms, fish/shrimp farms, environmental protection, petrochemical, water conservancy projects. CE and ISO licensed with 5-30 years warranty. Expert building guidance.

Video Showcase

Applications

1:Suitable for lining of landfills, river embankments, tailings dams, sewage dams and reservoirs, channels and different hydraulic ponds.

2:Anti-seepage & lining for subway, basement and tunnel.

3:Saline seepage and water proofing for roadbed and different foundation.

4:Used for seepage-proofing lining of embankment and dam, vertical impermeable layer for foundation, building of cofferdams, fertilizer plants.

5:Used in sea water & freshwater aquaculture ponds.

6:Used in the basis of road, dual carriageway & railway; the water-resistant layer of expansive soil.

7:Used in roof seepage-proofing/waterproofing as membranes.

Working Drawing

Specifications

❶ Thickness: 0.2mm-3.0mm

❷ Width:1-10m

❸ Colour: black, green, blue, yellow

Properties	Test Method	GMSH050	GMSH075	GMSH100	GMSH150	GMSH200
Thickness	ASTM D5199	0.50 mm	0.75 mm	1.00 mm	1.50 mm	2.00 mm
Density	ASTM D1505	0.940 g/co	0.940 g/cc	0.940 g/cc	0.940 q/cc	0.940 g/cc
Tensile Properties
Yield strength	ASTM D6693	7kN/m	11 kN/m	15 kN/m	22 kN/m	29kN/m
Break strength	Type IV	13 kN/m	20 kN/m	27 kN/m	40 kN/m	53 kN/m
Yield elongation		12%	12%	12%	12%	12%
Break elongation		700%	700%	700%	700%	700%
Tear Resistance	ASTM D1004	62 N	93 N	125 N	187 N	249 N
Puncture Resistance	ASTM D4833	160 N	240 N	320 N	480 N	640 N
Stress Crack Resistance	ASTM D5397	500 hrs	500 hrs	500 hrs	500 hrs	500 hrs
m Carbon Black Content	ASTM D1603	2.0%	2.0%	2.0%	2.0%	2.0%
Carbon Black Dispersion	ASTM D5596	For 10 different views:9in Categoriesor 2 and 1 inCategory 3
Oxidative Induction Time (OIT	ASTM D3895	100 min.	100 min.	100 min.	100 min.	100 min.
UV Resistance High Pressure OIT retained after 1600hrs	ASTM D5885	50%	50%	50%	50%	50%
Dimensions
Roll Width (m)		7	7	7	7	7
Roll Length (m		420	280	210	140	105