Papua New Guinea PP Plastic Polyester Biaxial Geogrid for Mine and Road Foundation Reinforcement Good Sale

Polyester biaxial geogrid is manufactured from high tenacity multifilament polyester yarns and coated with durable polymer, it is used to stabilize the earth structures, such as road, highway, railway, airport, MSE wall, steep slope and pavement construction.

Category:

Papua New GuineaPP Biaxial Geogrid

Phone:+86 13105487610

Product Description

Introduction

Plastic biaxial geogrid is the kind of geosynthetic material which is widely used to reinforce retaining walls, as well as subbases or subsoils below roads or structures. Plastic biaxial geogrid is often made from plastic materials which may be high-density polypropylene or high-density polyethylene (HDPE) resins through the processes of extruding, sheet forming, punching and stretching.

Video Showcase

Applications

*Improve the stability and bearing capacity of the roadbed, and extend the service life;
* Provent the deformation and cracking of subguarde caused by the loss of subgrade materials;
* High strength,good fiexibility,anti-aging,resisting acid and alkaline;
* The filling capacity of retaining wall is improved, the earth pressure of retaining wall is reduced,the cost is saved, the service life is extended, and the maintenance cost is reduced.

Working Drawing

1. Soil reinforcement applications such as retaining walls, steepened slopes, bridge abutments, embankments, embankments over soft soils
2. Waste containment, as well as subbases or subsoils below roads or structures.
3. Highway, railway, port, airport and municipal project
4. Support in the recovery working face of coal mine

Specifications

Item	Test Method	Unit	PBX1515		PBX2020		PBX3030		PBX4040		PBX5050
Item	Test Method	Unit	MD	TD	MD	TD	MD	TD	MD	TD	MD	TD
Polymer	-	-	PP
Minimum Carbon Black	ASTM D 4218	%	2
Tensile Strength	ASTM D 6637	kN/m	15	15	20	20	30	30	40	40	50	50
Tensile Strength @ 2% Strain	ASTM D 6637	kN/m	5	5	7	7	10.5	10.5	14	14	17.5	17.5
Tensile Strength @ 5% Strain	ASTM D 6637	kN/m	10.5	10.5	14	14	21	21	28	28	35	35
Elongation	ASTM D 6637	%	13	13	13	13	13	13	13	13	13	13
Junction Efficiency	GRI GG2	%	93	93	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D 7748	mg-cm	250,000		750,000		2,000,000		4,800,000		8,000,000
Aperture Stability	ASTM D 7864	m-N/deg	0.32		0.50		0.75		0.98		1.10
Aperture Size	-	mm	38	38	38	38	36	36	35	35	33	33
Roll Width	-	m	3.95 or 5.95
Roll Length	-	m	50