Guyana 3D Composite Drainage Net 4mm5mm6mm Garbage Dump Subgrade Tunnel

Composite Drainage Net is a new type of drainage geosynthetic product, it is made from three-dimension drainage net bonding to needle punched non woven geotextile by one or two sides. Three dimensional composites drainage network consists of a tri-dimension thick vertical rib, and a inclined rip on the top and bottom.

Category:

GuyanaComposite Drainage Net

Phone:+86 13105487610

Product Description

Introduction

Three dimensional composite drainage network is a new type of geosynthetics. Its structure is a three dimensional geonet core, and there are needle punched non woven geotextiles on both sides. The three dimensional geogrid core consists of a thick vertical rib and an inclined rib at the top and bottom, which can rapidly drain the around water from the road. It also has a pore maintenance system, which can block capillary water under high load. At the same time, it can also play the role of isolation and foundation reinforcement.

Video Showcase

Applications

Good flexibility and permeability;In coastal engineering, use its characteristics of good flexibility and permeability to buffer the impact energy of waves
Strong high pressure load;Can withstand a compression load of about 3000A for a long time
Good performance;Made with three-layer special structure, flexible and durable, strong acid and alkali resistance, not perishable, and long service life
Reduce cold expansion;Laying a three-dimensional composite drainage net can help reduce the impact of frost heave
Uniform mixing;It can hydrate the concrete evenly, whether it is for rigid roads or flexible road systems

Working Drawing

Specifications

Property	unit		BC50/D200	BC63/D200	BC70/D200	BC80/D200	Test Standard
Geocomposite specification
Hydraulic conductivity(MD)	M²/s	2.8×10-3		3.2×10-3	4.0×10²	5×10-3	ASTM D4716
Puncture	KN/m	0.17		0.17	0.17	0.17	ASTM D7005
Resistance	KN/m	0.17		0.17	0.17	0.17	ASTM D7005
Core Material Geonet Specification
Thickness	mm	6.3		7.0	8.0	9.0	ASTM D5199
Density	g/cm³	0.94		0.94	0.94	0.94	ASTM D1505
Carbon Black Content	%	2		2	2	2	ASTM D1603
Tensile strength (MD)	KN/m	8.0		10.0	12.0	14.0	ASTM D7179
Geotextile Specification
Unit weight	g/m2	200		200	200	200	200
Geotextile type		Continuous filament non-woven geotextile