Papua New Guinea 150mm Height Virgin HDPE Geocells for Retaining Wall

Geocell is a flexible three-dimensional, honeycomb like structures made from high-density polyethylene(HDPE) strips which are ultrasonically bonded together to form an extremely strong configuration.

Category:

Papua New GuineaHDPE Geocell

Phone:+86 13105487610

Product Description

Introduction

The geocell is the sheet material which is made by the polyester plastic and the 3D network structure material which becomes after the high strength ultrasonic welding, it uses the local material, the sand, the crushed stone, the soil to take the packing material, forms the general structure the combination material, realize the high bearing capacity, both may form the stable roadbed, and may on turfing, the afforested stable side slope.

xiuhe Geocell is made of a new type of high strength geosynthetics, which is popular with both domestic and abroad, in accordance with GB/T 19274-2003 implementation of the standards, which welding the strengthened HDPE sheets by the high-power ultrasonic and forming to be a structure of three-dimensional reticular formation. Easily folding and convenient for transportation. When be in construction, the geocell can be pull into a network and launched into a three dimensional honeycomb grid. As it filled in soil, macadam, concrete or other granular material, constituted to be a construction which has strong side wise restraint and high rate of stiffness.

Video Showcase

Applications

1. Light material, resistant o wear and chemical properties stability, lightfastness aging, acid and basic resistance, applicable to the different soil and geological conditions of the desert.

2.The lateral limits and higher anti-skid and anti-deformation, effectively increase the carrying capacity of roadbed and decentralized load.

3.High capacity and good dynamic performance, anti-erosion ability.

4.A high degree of geocell change, such as welding geometry from different projects can meet the needs.

5.Flexibility,small transport to connect to facilitate the construction speed.

6.The construction of local materials can reduce construction costs, superimposed with convenient for transportation.

Working Drawing

Properties	TestMethod	Unit	Value
Polymer		-	HDPE
Density	ASTM D1505	g/cm3	0.94
Carbon black content	ASTM D1603	%	1.5
Sheet thickness (Smooth)	ASTM D5199	mm	1.1or1.2
Sheet thickness (Textured)	ASTM D5199	mm	1.5
Seam peel strength	Celldepth
		N	75mm	1060
		N	100mm	1420
		N	150mm	2130
		N	200mm	2840
Weld spacing		mm	330	356	400	445	660	712
Expanded cell size (WxL)		mm	244X203	259X224	295X250	320X287	488X408	508X475
Expanded panel size (WxL)		m	2.44X6.15	2.56X6.52	4X5	2.56X8.35	2.44X12.29	2.56X13.72
Expanded panel area		m2	15	16.7	20	21.4	30	35.12