Papua New Guinea Maceta NonWoven Geotextile Fabric Geosynthetic 250GSM Sour Resist

Non woven geotextile, in addition recounted as geotextile, is a kind of geotextile made from fiber factors with the aid of mechanical, chemical, or thermal techniques such as spinning, melting, or bonding.

Category:

Papua New GuineaGeotextile

Phone:+86 13105487610

Product Description

Introduction

Geotextiles are permeable nonwoven fabrics used to separate,filter,reinforce, protect or drain.Geotextiles allow filtration or separation of granular layers in roads and rail applications,used to protect membranes in landfill applications,used in coastal defence applications and used in landscaping to protect surfaces and structures from weeds and root growth.

Geotextiles are availabel as woven and non-woven .As liner protection, against physical damage, the non wovens are normally the answer.They are made up of fibers of polyester or polypropylene in random directions and punched together by needles during the manufacturing process.Geotextiles are commenly used to separate layers like clay and drainage and to protect liner from damage.

Video Showcase

Applications

1, High strength, due to the use of plastic fiber, it can maintain full strength and elongation in both wet and dry conditions.
2, Corrosion resistance, in different degrees of acidity and alkalinity of the soil and water can be long corrosion resistance.
3, Good water permeability There are voids between the fibers, so there is good water permeability.
4, Good anti-microbial property It is not damaged by microorganisms and insects.

Working Drawing

Specifications

Filament non-woven geotextile

Properties	Test Method	Unit	PETNW150	PETNW200	PETNW250	PETNW300	PETNW350	PETNW400	PETNW500	PETNW600
Tensile Strength (MD/TD)	ASTM D4595	kN/m	9.5	13	17	19	23	26	34	38
Tensile Elongation (MD/TD)	ASTM D4595	%	50	60	60	60	60	60	60	60
Grab Tensile Strength (MD/TD)	ASTM D4632	N	550	730	1000	1100	1400	1700	2000	2500
Grab Elongation (MD/TD)	ASTM D4632	%	50	50	60	60	60	60	60	60
Trapezoidal Tear Strength (MD/TD)	ASTM D4533	N	270	330	430	450	540	610	770	900
CBR Burst Strength	ASTM D6241	N	1800	2300	2800	3200	3600	4500	6000	7000
Pore Size O90	ASTM D4751	µm	110	110	100	100	90	80	70	70
Water Flow Q100	ASTM D4491	L/m2/s	235	210	190	170	160	125	100	80
U.V. Resistance	ASTM D4355	%@500h	70	70	70	70	70	70	70	70
Thickness	ASTM D5199	mm	1.2	1.6	1.9	2.2	2.5	2.8	3.4	4.2
Weight	ASTM D5261	g/m2	150	200	250	300	350	400	500	600
Roll Width	-	m	6	6	6	6	6	6	6	6
Roll Length	-	m	250	150	150	100	100	100	75	50