Papua New Guinea Soil Reinforcement One Way Uniaxial HDPE Pp Geogrid Price Uniaxial Geogrid

HDPE uniaxial geogrid is manufactured from select grades of High Density Polyethylene, from the process of extruding and longitudinal stretching.

Category:

Papua New GuineaPP/HDPE Uniaxial Geogrid

Phone:+86 13105487610

Product Description

Introduction

Uniaxial Geogrid is made of excessive molecular polyethelene after extruded and laminated and punched into ordinary mesh earlier than longitudinal stretching. This manner makes excessive molecule in direct line nation in rectangular oval internet shape with uniform distribution and excessive node intensity. This shape has as an alternative excessive tensile energy and stretch modulus, specifically our merchandise of this variety have ultimate world category tensile power and stretch modulus with extensibility between 2% and 5%. The soil affords perfect pressure carrying and diffusing chain system. It has giant tensile power (>150Mpa), and is appropriate for specific types of soil. It is a prevailing reinforcement material.

Video Showcase

Applications

1. Enhance roadbed and successfully diffuse its load to enhance its balance and bearing capability and expand carrier life;
2. Can endure greater alternate load;
3. Prevent roadbed distortion and crack induced via the loss of roadbed materials;
4. Increase the self-supporting property of fill in the back of holding wall, reduce the earth strain of keeping wall, store cost, amplify provider lifestyles and limit renovation expense;
5. Combine anchor sprouting concrete development approach to provide aspect slope maintenance, which no longer solely saves funding by using 30%-50% however additionally reduces erection time through one time or above.
6. To enlarge geogrid in the roadbed and floor of highways can minimize flexure, song and put off the flawing look by means of 3-9 folds and minimize the thickness of structural layer through 36% ;
7. It is relevant to any sort of soil, now not indispensable to draw cloth from different place, saving time and labor;
8. Simple and speedy development will appreciably minimize building cost.

Working Drawing

Specifications

Index Properties	Test Method	Unit	UX60PE	UX80PE	UX90PE	UX120PE	UX130PE	UX160PE	UX170PE	UX180PE
Polymer	-		HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE
Minimum Carbon Black	ASTM D4218	%	2	2	2	2	2	2	2	2
Ultimate Tensile Strength,MD	ASTM D6637	kN/m	60	80	90	120	130	160	170	180
Tensile Strength @2%Strain,MD	ASTM D6637	kN/m	16	21	24	33	38	47	49	52
Tensile Strength @5%Strain,MD	ASTM D6637	kN/m	31	40	45	65	75	93	96	103
Strain@UltimateStrength,MD	ASTM D6637	%	11.5	11.5	11.5	11.5	11.5	11.5	11.5	11.5
Junction Efficiency	GRI GG2-87	%	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D1388	mg-cm	530,000	1,150,000	2.300,000	6,050,000	6,400,000	8,600,000	8,900,000	9,100,000
UV Resistance	ASTM D4355	%	98	98	98	98	98	98	98	98
Minimum Reduction Factor for Installation Damage (RFid)	ASTM D5818	-	1.05	1.05	1.05	1.05	1.05	1.05	1.05	1.05
Reduction Factor for Creep for 120-year Design Life (RFcr)	ASTM D5262	-	2.6	2.6	2.6	2.6	2.6	2.6	2.6	2.6
Roll Width	-	m	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2
Roll Length	-	m	100	50	50	50	50	50	50	50