Seychelles The Waterproof Effect of HDPE Geomembrane Tank Liner ls 0.75 mm

Smooth HDPE Geomembrane is manufactured from High Density Polyethylene resin with proportional carbon black antioxidant, anti-aging and UV-resistance materials by the technology of coextrusion-blown triple layer.

Category:

SeychellesHDPE Geomembrane

Phone:+86 13105487610

Product Description

Introduction

HDPE Geomembrane made from polyethylene polymer materials, thru blowing or extruding technology, CE/ASTM/GB requirements available. Our thickness degrees from 0.2-3mm; smooth, textured or bi-color surfaces available. HDPE Geomembrane primary feature is to forestall the liquid leakage and fuel volatile. It is broadly used in lining of pond reservoirs, canal, waste water, landfill, dams, Lakes, fish ponds and many different areas due to the fact HDPE Geomembrane is fee effectiveness and resistance in opposition to chemical and climate conditions.

Video Showcase

Applications

1. Prevent leakage disposal in landfills, waste water, or in waste dregs disposing field.
2. Retain river bank, lake dam, mine, reservoir, tunnel. Working as liquid storage pools.
3. Prevent leakage in subway, basement, tunnel. Also, it prevents anti-salt leakage in roadbed, and different projects.
4. The airplane and the vertical path laying of dam and floor sill, LLDPE Geomembrane Liner is used in the development fence and waste fabric fields.
5. Used in floor sill of road, highway, railway, and water-resistant layer of swelling clay.
6. Prevent leakage on rooftop.

Working Drawing

Specifications

❶ Thickness: 0.2mm-3.0mm

❷ Width:1-10m

❸ Colour: black, green, blue, yellow

Properties	Test Method	GMSH050	GMSH075	GMSH100	GMSH150	GMSH200
Thickness	ASTM D5199	0.50 mm	0.75 mm	1.00 mm	1.50 mm	2.00 mm
Density	ASTM D1505	0.940 g/co	0.940 g/cc	0.940 g/cc	0.940 q/cc	0.940 g/cc
Tensile Properties
Yield strength	ASTM D6693	7kN/m	11 kN/m	15 kN/m	22 kN/m	29kN/m
Break strength	Type IV	13 kN/m	20 kN/m	27 kN/m	40 kN/m	53 kN/m
Yield elongation		12%	12%	12%	12%	12%
Break elongation		700%	700%	700%	700%	700%
Tear Resistance	ASTM D1004	62 N	93 N	125 N	187 N	249 N
Puncture Resistance	ASTM D4833	160 N	240 N	320 N	480 N	640 N
Stress Crack Resistance	ASTM D5397	500 hrs	500 hrs	500 hrs	500 hrs	500 hrs
m Carbon Black Content	ASTM D1603	2.0%	2.0%	2.0%	2.0%	2.0%
Carbon Black Dispersion	ASTM D5596	For 10 different views:9in Categoriesor 2 and 1 inCategory 3
Oxidative Induction Time (OIT	ASTM D3895	100 min.	100 min.	100 min.	100 min.	100 min.
UV Resistance High Pressure OIT retained after 1600hrs	ASTM D5885	50%	50%	50%	50%	50%
Dimensions
Roll Width (m)		7	7	7	7	7
Roll Length (m		420	280	210	140	105