Papua New Guinea PP Grille Mesh Uniaxial Plastic Geogrid for Protective Soil Global Sell

HDPE uniaxial geogrid is manufactured from select grades of High Density Polyethylene, from the process of extruding and longitudinal stretching.

Category:

Papua New GuineaPP/HDPE Uniaxial Geogrid

Phone:+86 13105487610

Product Description

Introduction

Geogrids are geosynthetic fabric made from polymers such as polypropylene,polyethylene or polyester and are used extensively in Civil Engineering functions to supply tensile reinforcement of soil.They are in the shape of open grids so that soil can strike via the apertures and the two substances interlock collectively to provide composite behaviour. They are used in the building of protecting walls, steep slopes, roadway bases and foundations.

XiuHe HDPE Uniaxial geogrid is specifically designed for soil reinforcement.
HDPE Uniaxial geogrid is specifically designed for soil reinforcement. It is manufactured with High Density Polyethylene resins, from the system of extruding and longitudinal stretching. It has excessive tensile strength, great interlock ability and low creep deformation.

Video Showcase

Applications

Uniaxial geogris is variety of excessive electricity geosynthetic. It has vast purposes in dyke, tunnel, pier, highway, railway and building.
Its foremost purposes are follows:
1. Enhance roadbed distortion and crack prompted by means of the loss of roadbed materials;
2. Bear greater alternate load;
3. Prevent roadbed distortion and crack induced through the loss of roadbed materials;
4. Increase the self-supporting property of fill in the back of holding wall, limit the earth stress of maintaining wall, keep cost, enlarge provider existence and decrease preservation expenses;
5. Combine anchor sprouting concrete building approach to provide facet slope maintenance, which no longer solely saves funding by using 30%-50% however additionally reduces erection time with the aid of one time or above;
6. To enlarge geogrid in the roadbed and floor of highways can decrease flexure, music and put off the flawing look with the aid of 3-9 folds and limit the thickness of structural layer via 36%;
7. Simple and fast building will noticeably decrease the development cost.

Working Drawing

Specifications

Index Properties	Test Method	Unit	UX60PE	UX80PE	UX90PE	UX120PE	UX130PE	UX160PE	UX170PE	UX180PE
Polymer	-		HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE
Minimum Carbon Black	ASTM D4218	%	2	2	2	2	2	2	2	2
Ultimate Tensile Strength,MD	ASTM D6637	kN/m	60	80	90	120	130	160	170	180
Tensile Strength @2%Strain,MD	ASTM D6637	kN/m	16	21	24	33	38	47	49	52
Tensile Strength @5%Strain,MD	ASTM D6637	kN/m	31	40	45	65	75	93	96	103
Strain@UltimateStrength,MD	ASTM D6637	%	11.5	11.5	11.5	11.5	11.5	11.5	11.5	11.5
Junction Efficiency	GRI GG2-87	%	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D1388	mg-cm	530,000	1,150,000	2.300,000	6,050,000	6,400,000	8,600,000	8,900,000	9,100,000
UV Resistance	ASTM D4355	%	98	98	98	98	98	98	98	98
Minimum Reduction Factor for Installation Damage (RFid)	ASTM D5818	-	1.05	1.05	1.05	1.05	1.05	1.05	1.05	1.05
Reduction Factor for Creep for 120-year Design Life (RFcr)	ASTM D5262	-	2.6	2.6	2.6	2.6	2.6	2.6	2.6	2.6
Roll Width	-	m	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2
Roll Length	-	m	100	50	50	50	50	50	50	50