PP/HDPE Uniaxial Geogrid

HDPE uniaxial geogrid is manufactured from select grades of High Density Polyethylene, from the process of extruding and longitudinal stretching.

Category:

Email:

Introduction

HDPE uniaxial geogrid is manufactured from select grades of High Density Polyethylene, from the process of extruding and longitudinal stretching.

HDPE uniaxial geogrid is mainly applied in soil reinforcement for retaining wall, slope stabilization, embankments.

• Retaining Wall Reinforcement

• Steep Slope Reinforcement

• Dam Reinforcement

Index Properties	Test Method	Unit	UX60PE	UX80PE	UX90PE	UX120PE	UX130PE	UX160PE	UX170PE	UX180PE
Polymer	-		HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE
Minimum Carbon Black	ASTM D4218	%	2	2	2	2	2	2	2	2
Ultimate Tensile Strength,MD	ASTM D6637	kN/m	60	80	90	120	130	160	170	180
Tensile Strength @2%Strain,MD	ASTM D6637	kN/m	16	21	24	33	38	47	49	52
Tensile Strength @5%Strain,MD	ASTM D6637	kN/m	31	40	45	65	75	93	96	103
Strain@UltimateStrength,MD	ASTM D6637	%	11.5	11.5	11.5	11.5	11.5	11.5	11.5	11.5
Junction Efficiency	GRI GG2-87	%	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D1388	mg-cm	530,000	1,150,000	2.300,000	6,050,000	6,400,000	8,600,000	8,900,000	9,100,000
UV Resistance	ASTM D4355	%	98	98	98	98	98	98	98	98
Minimum Reduction Factor for Installation Damage (RFid)	ASTM D5818	-	1.05	1.05	1.05	1.05	1.05	1.05	1.05	1.05
Reduction Factor for Creep for 120-year Design Life (RFcr)	ASTM D5262	-	2.6	2.6	2.6	2.6	2.6	2.6	2.6	2.6
Roll Width	-	m	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2
Roll Length	-	m	100	50	50	50	50	50	50	50