Home page

Landfill biogas digester Composite Geomembrane

Composite geomembrane is a geotextile and geomembrane composite impermeable materials, it is mainly used for seepage control, composite geomembrane is divided into a cloth and a membrane and two cloth and a membrane

Commodity name： Landfill biogas digester Composite Geomembrane

Category:

Composite Geomembrane

Email:

john@xiuhegeo.com

Online consultation

Back to list

Description

Introduction

Composite geomembranes are widely used in canal anti-seepage engineering. The extensive application and effectiveness of geosynthetics in civil engineering, especially in flood control and emergency engineering, have attracted high attention from engineering and technical personnel. From the aspects of anti-seepage, filtration, drainage, reinforcement, protection, etc.

1. One cloth, one film (cloth: 100-1000g/m2, film thickness: 0.1-1.5mm)
2. Two cloths and one film (cloth: 80-600g/m2, film thickness: 0.2-1.5mm)
3. One cloth and two films (cloth: 100-1000g/m2, film thickness: 0.1-0.8mm)
4. Multi cloth and multi film (cloth: 100-1000g/m2, film thickness: 0.1-0.8mm)

Video Showcase

Composite geosynthetic membrane is a geosynthetic anti-seepage fabric composed of plastic movie as the anti-seepage substrate and non-woven fabric. Its anti-seepage overall performance basically relies upon on the anti-seepage overall performance of the plastic film. The plastic movies used for anti-seepage at domestic and overseas generally encompass polyvinyl chloride (PVC), polyethylene (HDPE, LDPE, LLDPE), and ethylene/vinyl acetate copolymer (EVA)，Civil engineering wishes such as anti-seepage, isolation, reinforcement, and crack prevention reinforcement in water conservancy, municipal engineering, construction, transportation, subway, tunnel, and engineering construction. Commonly used for anti-seepage remedy of embankments, drainage ditches, and waste disposal sites.

Working Drawing

Specifications

Item		Index
Nominal breaking strength / ( kN / m )		5	7.5	10	12	14	16	18	20
Longitudinal and transverse rupture strength /( kN / m )≥		5.0	7.5	10	12	14	16	18	20
Vertical and horizontal standard strength corresponding to elongation /%		30-100
CBR bursting strength /kN ≥		1.1	1.5	1.9	2.2	2.5	2.8	3.0	3.2
Vertical and horizontal tear strength / kN ≥		0.15	0.25	0.32	0.40	0.48	0.56	0.62	0.70
Vertical Permeability Index / ( cm / s)		According customer needs
Width deviation /%		-1.0

Item		Membrane thickness/mm
Item		0.2	0.3	0.4	0.5	0.6	0.7	0.8	1.0
Hydrostatic pressure resistance / MPa	1 fabric with 1 membrane	0.4	0.5	0.6	0.8	1.0	1.2	1.4	1.6
Hydrostatic pressure resistance / MPa	2 fabric with 1 membrane	0.5	0.6	0.8	1.0	1.2	1.4	1.6	1.8