Home page

PP Biaxial HDPE Uniaxial Geogrid 30/30kn for Road Reinforcement

HDPE uniaxial geogrid is manufactured from select grades of High Density Polyethylene, from the process of extruding and longitudinal stretching.

Commodity name： PP Biaxial HDPE Uniaxial Geogrid 30/30kn for Road Reinforcement

Category:

PP/HDPE Uniaxial Geogrid

Email:

john@xiuhegeo.com

Online consultation

Back to list

Description

Introduction

The properties of Biaxial Geogrids, made of Polypropylene (PP) with their square apertures, high tensile strength and optimised geometry of nodes and ribs make them equal to any other similar material. The reinforcing action of PP Biaxial Geogrids lies mainly in confining soil and increasing its shearing resistance by a process of interlocking between the square ribs and the soil.
The load dispersal effect from the interlocking mechanism is highly effective and can reduce sub-base thickness and construction cost. PP Biaxial Geogrids can be used with any kind of mechanical fill material. Two aperture size ranges are available for optimum matching with project fill.

Video Showcase

Applications

Increase the bearing capacity of the roadbed and foundation and prolong their service life.
Prevent road surface and foundation from sinking or flawing, keep clean and beautiful ground surface.
Convenient construction saves time and labor, reduce mounting time and decrease maintenance expense.
Prevent culverts from flawing.
Enhance earth slope and prevent water loss and soil erosion.
Decrease underlayer thickness and save manufacturing cost.
nhance the stability of side slope turf net patch to improve greening.
Replace wire netting used in mine as intermediate ceiling netting.

Working Drawing

Specifications

Index Properties	Test Method	Unit	UX60PE	UX80PE	UX90PE	UX120PE	UX130PE	UX160PE	UX170PE	UX180PE
Polymer	-		HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE
Minimum Carbon Black	ASTM D4218	%	2	2	2	2	2	2	2	2
Ultimate Tensile Strength,MD	ASTM D6637	kN/m	60	80	90	120	130	160	170	180
Tensile Strength @2%Strain,MD	ASTM D6637	kN/m	16	21	24	33	38	47	49	52
Tensile Strength @5%Strain,MD	ASTM D6637	kN/m	31	40	45	65	75	93	96	103
Strain@UltimateStrength,MD	ASTM D6637	%	11.5	11.5	11.5	11.5	11.5	11.5	11.5	11.5
Junction Efficiency	GRI GG2-87	%	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D1388	mg-cm	530,000	1,150,000	2.300,000	6,050,000	6,400,000	8,600,000	8,900,000	9,100,000
UV Resistance	ASTM D4355	%	98	98	98	98	98	98	98	98
Minimum Reduction Factor for Installation Damage (RFid)	ASTM D5818	-	1.05	1.05	1.05	1.05	1.05	1.05	1.05	1.05
Reduction Factor for Creep for 120-year Design Life (RFcr)	ASTM D5262	-	2.6	2.6	2.6	2.6	2.6	2.6	2.6	2.6
Roll Width	-	m	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2
Roll Length	-	m	100	50	50	50	50	50	50	50