Home page

Customized white/black special size PP PET non-woven geotextile for pond protection

Non woven geotextile, in addition recounted as geotextile, is a kind of geotextile made from fiber factors with the aid of mechanical, chemical, or thermal techniques such as spinning, melting, or bonding.

Commodity name： Customized white/black special size PP PET non-woven geotextile for pond protection

Category:

Email:

Description

Introduction

Non woven geotextiles are used for roadbed steadiness that requires substantial strength. This product is within your means and affords the required excessive electricity at a very low cost. Geotextiles have excessive energy and weight ratio, and can face up to UV rays, soil chemicals, fungi, and insects. Narrow slit membrane woven geotextile is an brilliant separator that helps speed up the set up pace of street building initiatives and embankment construction. This product is an perfect preference for avenue development as it can prolong the provider existence of paved and unpaved areas. Non woven geotextiles are usually used for separation, reinforcement, and filtration.

Video Showcase

Applications

1.Reinforcement: Used in the constructions of highway, railway, airport, dam, prevent slope dike, retaining wall, etc. to improve stability.

2.Protection: To prevent the bank from eroding by wind, wave ,tidal and rain. Used for the projects such as revetment, slope protection and bottom protection, anti-soil erosion,etc.

3.Filtration: Used as filtering layer of dike, the dam, river and coast stone , slope, retaining wall to prevent sand grain through and allow freedom through of air or water.

Working Drawing

Specifications

Filament non-woven geotextile

Properties	Test Method	Unit	PETNW150	PETNW200	PETNW250	PETNW300	PETNW350	PETNW400	PETNW500	PETNW600
Tensile Strength (MD/TD)	ASTM D4595	kN/m	9.5	13	17	19	23	26	34	38
Tensile Elongation (MD/TD)	ASTM D4595	%	50	60	60	60	60	60	60	60
Grab Tensile Strength (MD/TD)	ASTM D4632	N	550	730	1000	1100	1400	1700	2000	2500
Grab Elongation (MD/TD)	ASTM D4632	%	50	50	60	60	60	60	60	60
Trapezoidal Tear Strength (MD/TD)	ASTM D4533	N	270	330	430	450	540	610	770	900
CBR Burst Strength	ASTM D6241	N	1800	2300	2800	3200	3600	4500	6000	7000
Pore Size O90	ASTM D4751	µm	110	110	100	100	90	80	70	70
Water Flow Q100	ASTM D4491	L/m2/s	235	210	190	170	160	125	100	80
U.V. Resistance	ASTM D4355	%@500h	70	70	70	70	70	70	70	70
Thickness	ASTM D5199	mm	1.2	1.6	1.9	2.2	2.5	2.8	3.4	4.2
Weight	ASTM D5261	g/m2	150	200	250	300	350	400	500	600
Roll Width	-	m	6	6	6	6	6	6	6	6
Roll Length	-	m	250	150	150	100	100	100	75	50