Home page

Geomembrane Lining Material Pre Moulded Ponds Liner for Sea or Fresh Water Fish Pond in indonesia

Geomembranes use plastic movies as anti-seepage substrates, commonly which encompass polyvinyl chloride (PVC) and polyethylene (PE), EVA (ethylene/vinyl acetate copolymer). In tunnel applications, ECB (ethylene vinyl acetate modified asphalt combo geomembrane) is moreover designed and used.

Commodity name： Geomembrane Lining Material Pre Moulded Ponds Liner for Sea or Fresh Water Fish Pond in indonesia

Category:

Email:

Description

Introduction

"Pond liner" HDPE geomembrane is manufactured from High Density Polyethylene resins. The surfaces of both sides are smooth. The products are manufactured by the technology of coextrusion-blown triple layer. It provides geomembranes with specific properties on each layer, e.g. bicolor and/or textured designs.

Video Showcase

Applications

Usage of geomembrane in the mining industry started in the 1970s and has increased thereafter. It is used as a lining solution for evaporation ponds, heap leach pads and tailing impoundments.

The design and construction of these heap leach pads are regulated to protect the environment from exposure to harmful chemicals so a lining system, usually a HDPE geomembrane, forms a critical component in construction of these heap leach facilities.

Geomembranes are also used during the end of a mine's lifespan. As a part of mine restoration, HDPE liners are used to seal the mine and prevent waste products from contaminating the surrounding environment. Overall, geomembrane lining is a safe and effective solution to protect the environment from harmful industries.

Working Drawing

Specifications

Thicknesses mm	0.75	1	1.25	1.5	2	2.5	3
Densities g/cm³	≥ 0.940
Roughness height	≥0.25
Tensile yield strength (longitudinal and transverse) N/mm	≥11	≥15	≥18	≥22	≥29	≥37	≥44
Tensile breaking strength (longitudinal and transverse) N/mm	≥8	≥10	≥13	≥16	≥21	≥26	≥32
Yield elongation (longitudinal and transverse) %	≥12
Elongation at break (longitudinal and transverse) %	≥100
Right angle tearing load (longitudinal and transverse) N	≥93	≥125	≥160	≥190	≥250	≥315	≥375
puncture strength N	≥ 200	≥ 270	≥335	≥400	≥ 535	≥670	≥800
Stress cracking under tensile load	≥300
Carbon black content %	2.0-3.0
Carbon Black Dispersibility	No more than 1 out of 10 data at level 3, not allowed at levels 4 and 5
Atmospheric pressure oxidation induction time (OIT)min	Atmospheric pressure oxidation induction time ≥ 100
Atmospheric pressure oxidation induction time (OIT)min	High pressure oxidation induction time ≥ 400
85°C heat aging %	≥55
anti-ultraviolet	≥ 50