Home page

Plastic PE Uniaxial Fence Mesh Geogrid for Road Driveway Reinforcement

HDPE uniaxial geogrid is manufactured from select grades of High Density Polyethylene, from the process of extruding and longitudinal stretching.

Commodity name： Plastic PE Uniaxial Fence Mesh Geogrid for Road Driveway Reinforcement

Category:

PP/HDPE Uniaxial Geogrid

Email:

john@xiuhegeo.com

Online consultation

Back to list

Description

Introduction

PP/HDPE uniaxial geogrid is to enhance the tensile strength of soil and prevent soil erosion. It is commonly used in road construction, retaining walls, slope stabilization, and other infrastructure projects where soil stability is crucial.

One of the key features of PP/HDPE uniaxial geogrid is its unidirectional strength. This means that the geogrid has superior tensile strength in one direction, which allows it to effectively distribute and withstand the forces exerted on the soil.

In addition, PP/HDPE uniaxial geogrid is lightweight, durable, and resistant to chemical and biological degradation. This ensures its long-term performance and reliability in various environmental conditions.

Installing PP/HDPE uniaxial geogrid is a relatively simple process. It involves laying the geogrid on the soil surface and securing it in place with anchors or soil staples. The geogrid can then be covered with additional layers of soil or aggregate to provide further reinforcement.

Video Showcase

Applications

Roadbed reinforcement: Unidirectional geogrid is used to enhance the roadbed, effectively disperse its load, improve the stability and bearing capacity of the road, and extend its service life.
Reinforcement of fill slope: In high fill slope engineering, unidirectional geogrids can provide reinforcement, control the horizontal displacement of the slope and the surface settlement at the top of the slope.
Retaining walls and steep slopes: used for constructing reinforced retaining walls, embankments, bridge decks, steep slopes and other slope protection projects along highways, railways, rivers, lakes and coasts.
Soft soil foundation: Laying unidirectional geogrids on soft soil foundation can improve the bearing capacity and stability of the foundation, and reduce settlement.
Environmental protection: In environmental engineering, such as landfills, it is used to prevent the spread of pollutants.
Ports and docks: In the construction of ports and docks, unidirectional geogrids can improve the stability of the structure.
Airport construction: used for reinforcing airport runways to improve their load-bearing capacity and durability.
Stability of fill structure: In fill structures, unidirectional geogrids help improve the stability of the structure and reduce deformation and cracks caused by the loss of fill materials.
Micro steel pipe pile top support technology: In response to the problem of the filling slope foot platform being easily washed away by rainwater, micro steel pipe pile top support technology is adopted, which can be used as a reference for similar projects.
Reinforcement of high fill slopes: In the reinforcement of high fill slopes, unidirectional geogrids can be combined with other reinforcement methods such as anchor rods and cables to improve the stability of the slope.

Working Drawing

Specifications

Index Properties	Test Method	Unit	UX60PE	UX80PE	UX90PE	UX120PE	UX130PE	UX160PE	UX170PE	UX180PE
Polymer	-		HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE
Minimum Carbon Black	ASTM D4218	%	2	2	2	2	2	2	2	2
Ultimate Tensile Strength,MD	ASTM D6637	kN/m	60	80	90	120	130	160	170	180
Tensile Strength @2%Strain,MD	ASTM D6637	kN/m	16	21	24	33	38	47	49	52
Tensile Strength @5%Strain,MD	ASTM D6637	kN/m	31	40	45	65	75	93	96	103
Strain@UltimateStrength,MD	ASTM D6637	%	11.5	11.5	11.5	11.5	11.5	11.5	11.5	11.5
Junction Efficiency	GRI GG2-87	%	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D1388	mg-cm	530,000	1,150,000	2.300,000	6,050,000	6,400,000	8,600,000	8,900,000	9,100,000
UV Resistance	ASTM D4355	%	98	98	98	98	98	98	98	98
Minimum Reduction Factor for Installation Damage (RFid)	ASTM D5818	-	1.05	1.05	1.05	1.05	1.05	1.05	1.05	1.05
Reduction Factor for Creep for 120-year Design Life (RFcr)	ASTM D5262	-	2.6	2.6	2.6	2.6	2.6	2.6	2.6	2.6
Roll Width	-	m	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2	1/1.3/2
Roll Length	-	m	100	50	50	50	50	50	50	50