Home page

PP Anti Grass Weed Mat Geotextile

Polypropylene Baked Grass Shelter is a high quality grass cover material with excellent UV resistance and durability.

Commodity name： PP Anti Grass Weed Mat Geotextile

Category:

Polypropylene (PP) Anti-grass Geotextile

Email:

john@xiuhegeo.com

Online consultation

Back to list

Description

Introduction

This geotextile can be made of polypropylene (PP) synthetic fiber on needle punch machine.

The mass is available from 100gsm/m² to 1500gsm/m² and the width available from 2.0m-8m, monolayer or multilayer (reinforcement geotextiles), long fiber or short fiber.
Color: All kinds of color are available.
The annual production ability is 10 million square meters.
The fabric can also be heat treated by infrared at customer's requirements. Our geotextile are UV stabilized to give protection against aging under exposure to natural ultra-violet light.

Features

1,high strength, due to the use of plastic fiber, in the dry and wet state can maintain sufficient strength and elongation.
2,corrosion resistance, in different pH soil and water for a long time corrosion resistance.
3,good water permeability there is a gap between the fibers, so there is good water permeability.
4,good antimicrobial resistance to microorganisms, moth are not damaged.
5,construction is convenient, because the material is light and soft, it is convenient to transport, lay and construction.

Video Showcase

Application

1.Reinforcement: Used in the constructions of highway, railway, airport, dam, prevent slope dike, retaining wall, etc. to improve stability.

2.Protection: To prevent the bank from eroding by wind, wave ,tidal and rain. Used for the projects such as revetment, slope protection and bottom protection, anti-soil erosion,etc.

3.Filtration: Used as filtering layer of dike, the dam, river and coast stone , slope, retaining wall to prevent sand grain through and allow freedom through of air or water.

Working Drawing

Specifications

Woven Geotextile Technical Specifications (GB/T 17690-1999)
Item		Specifications
Item		20-15	30-22	40-28	50-35	60-42	80-56	100-70
1	Warp breaking strength (kN/m)≥	20	30	40	50	60	80	100
2	Weft breaking strength (kN/m)≥	15	22	28	35	42	56	70
3	Longitude and latitude elongation at break %≤	28
4	Trapezoidal tear strength (longitudinal force) kN≥	0.3	0.45	0.5	0.6	0.75	1.0	1.2
5	Burst strength kN≥	1.6	2.4	3.2	4.0	4.8	6.0	7.5
6	Vertical permeability coefficient, cm/s	10-1-10-4
7	Equivalent aperture / mm	0.08-0.5
8	Mass per unit area / sqm.	120	160	200	240	280	340	400
8	Allowable deviation value /%	±10
9	UV resistance strong retention rate /%	According to customer needs

Weight	70-130gsm
Width	0.4-5.3m
Length	5m.15m.50m.100m or as your requirements
Color	Green,white,black or as your requirements
Material	HDPE or PP
MOQ	20 rolls
Delivery time	20 days after receving the deposit
Payment terms	TT.LC at sight