Home page

150GSM 100% Short Fiber Non Woven Needle Punched PP Geotextile

PP Staple Fiber Nonwoven Geotextile is composed of polypropylene fibers which are formed into a stable network such that the fibers retain their relative position，Lin Yuan Geotextile is inert to biological degradation and resists naturally encountered chemicals, acids and alkalis.

Commodity name： 150GSM 100% Short Fiber Non Woven Needle Punched PP Geotextile

Category:

Polypropylene(PP) Staple Fiber Needle Punched Non-woven Geotextile

Email:

john@xiuhegeo.com

Online consultation

Back to list

Description

Introduction

PP non woven geotextile made of Polypropylene steady fiber via nonwoven needle punched manufacture process. besides chemical components and warmth treatment. It is an environmentally pleasant building material.

Geotextiles Products as protection, filtration, or separation layer choice to numerous terrain such as soil, rock, sand, and so on. Also can be handled by way of UV Resistance, Thermal Bonded, Color Custom-made, etc.

Video Showcase

Applications

1. Reinforcement in maintaining wall backfill.
2. Strengthen the susceptible street and repair the cracks on the road.
3. Improve the steadiness of slope and reinforcement soil, keep away from water and soil loss, and soil frozen injuries.
4. Isolation layer of synthetic backfill soil stone with basis and specific tundra.
5. Filtration layer of drainage pipe or gravel sub-drain.
6. Vertical or horizontal drainage; Bury in the soil to launch air pressure.
7. Reinforce the susceptible basis of engineering roads, railways, embankments, and airports.

Working Drawing

Short fiber PP geotextile is a common geotechnical material, which is composed of polypropylene (PP) short fibers that are combined by needle punching or melting.

Specifications

Properties	TestMethod	Unit	GXSF150	GXSF200	GXSF300	GXSF400	GXSF500	GXSF600	GXSF800	GXSF1000
Tensile Strength (MD/TD)	ASTM D4595	kN/m	8	11	20	24	28	34	48	50
Tensile Elongation (MD/TD)	ASTM D4595	%	50	60	60	60	60	60	60	60
Grab Tensile Strength (MD/TD)	ASTM D4632	N	520	700	1100	1500	1800	2200	2800	3000
Grab Elongation (MD/TD)	ASTM D4632	%	50	50	60	60	60	60	60	60
Trapezoidal Tear Strength (MD/TD)	ASTM D4533	N	220	330	400	480	560	620	860	880
CBR Burst Strength	ASTM D6241	N	1700	2400	3200	4300	5300	6000	6800	7000
Pore Size O90	ASTM D4751	µm	90	85	80	75	70	60	55	50
Water Flow Q100	ASTM D4491	L/m2/s	160	145	140	120	105	95	90	80
Weight	ASTM D5261	g/m2	150	200	300	400	500	600	800	1000
Roll Width	-	m	5.95	5.95	5.95	5.95	5.95	3.95	3.95	3.95
Roll Length	-	m	250	150	100	100	75	50	50	50