Home page

Adjustable 2.0mm Single Sided Textured Harmless HDPE Geomembrane

Geomembranes use plastic movies as anti-seepage substrates, commonly which encompass polyvinyl chloride (PVC) and polyethylene (PE), EVA (ethylene/vinyl acetate copolymer). In tunnel applications, ECB (ethylene vinyl acetate modified asphalt combo geomembrane) is moreover designed and used.

Commodity name： Adjustable 2.0mm Single Sided Textured Harmless HDPE Geomembrane

Category:

Email:

Description

Introduction

Anti seepage Geomembrane is a waterproof material used in civil engineering, usually made of synthetic materials such as high-density polyethylene (HDPE), polypropylene (PP), or polyvinyl chloride (PVC). Therefore, anti-seepage geotextile membranes are widely used in civil engineering such as roads, tunnels, dams, embankments, and landfills, providing reliable anti-seepage protection for engineering projects.

Video Showcase

Applications

High waterproof performance: Due to its high density, the anti-seepage geotextile film has a good waterproof effect, which can effectively isolate water, prevent groundwater infiltration and soil liquid leakage.

Corrosion resistance: The anti-seepage geotextile film has excellent chemical corrosion resistance and can resist the erosion of corrosive substances such as acid, alkali, and chemical agents.

Aging resistance: The specially treated anti-seepage geotextile film has good aging resistance and can be used in outdoor environments for a long time without being affected by UV rays, oxidation, thermal deformation, etc.

Impermeability: The anti-seepage geotextile membrane has a high thickness and tight structure, outstanding impermeability, and can effectively prevent the intrusion of groundwater.

Flexibility and plasticity: The anti-seepage geotextile membrane has a certain degree of flexibility and plasticity, which can adapt to the needs of different shapes and surfaces, and is easy to construct.

Environmental friendliness: Modern anti-seepage geotextile membranes are non-toxic and odorless during production and use, meeting environmental protection requirements.

Working Drawing

Specifications

Thicknesses mm	0.75	1	1.25	1.5	2	2.5	3
Densities g/cm³	≥ 0.940
Roughness height	≥0.25
Tensile yield strength (longitudinal and transverse) N/mm	≥11	≥15	≥18	≥22	≥29	≥37	≥44
Tensile breaking strength (longitudinal and transverse) N/mm	≥8	≥10	≥13	≥16	≥21	≥26	≥32
Yield elongation (longitudinal and transverse) %	≥12
Elongation at break (longitudinal and transverse) %	≥100
Right angle tearing load (longitudinal and transverse) N	≥93	≥125	≥160	≥190	≥250	≥315	≥375
puncture strength N	≥ 200	≥ 270	≥335	≥400	≥ 535	≥670	≥800
Stress cracking under tensile load	≥300
Carbon black content %	2.0-3.0
Carbon Black Dispersibility	No more than 1 out of 10 data at level 3, not allowed at levels 4 and 5
Atmospheric pressure oxidation induction time (OIT)min	Atmospheric pressure oxidation induction time ≥ 100
Atmospheric pressure oxidation induction time (OIT)min	High pressure oxidation induction time ≥ 400
85°C heat aging %	≥55
anti-ultraviolet	≥ 50