Home page

Prevent penetration Polypropylene (PP) Woven Geotextile

Woven Geotextiles are woven from durable, high-modulus polypropylene yarns into competent, robust, dimensionally stable geotextiles.

Commodity name： Prevent penetration Polypropylene (PP) Woven Geotextile

Category:

Polypropylene (PP) Woven Geotextile

Email:

john@xiuhegeo.com

Online consultation

Back to list

Description

Introduction

Machine woven geotextile is a geosynthetic material woven from high-strength synthetic fibers or natural fibers. It has good tensile strength, tear strength, and corrosion resistance. The following are the main uses of woven geotextiles:

Features

Soil protection: Machine woven geotextiles can be used to forestall soil erosion and soil erosion. It can be positioned on the floor of soil as a defensive layer to forestall water glide erosion and wind erosion, and to guard soil first-rate and stability. This is in particular essential in steep slopes, soil and water conservation, and slope safety projects.

Separation and filtration: Machine woven geotextiles can be used as separation and filtration layers between soil layers. It can stop mixing and pass infiltration between exceptional soil layers, making sure the balance and separation of the soil layers. In addition, it can additionally filter out particles in the soil to stop blockage of the drainage system.

Video Showcase

Application

Prevent penetration and leakage: Machine woven geotextiles have a sure diploma of impermeability and can be used to stop the penetration and leakage of beverages or gases. It can serve as an isolation layer to stop water or pollution from seeping into groundwater or different touchy areas in the backside soil layer, defending the surroundings and water resources.

Strengthening soil: Machine woven geotextiles can shape a reinforcement layer in the soil, enhancing its steadiness and bearing capacity. It can disperse loads, limit soil deformation and settlement, and make bigger the shear energy of the soil. This is mainly vital in tasks such as roads, railways, embankments, and stacking areas.

Civil engineering, water conservancy engineering, environmental protection, agriculture and different fields

Working Drawing

Specifications

project		unit	Testing standards	Technical parameters
				HK270	HK370	HK570	HK380 /（a）	HK380B	HK580/（a）	HK580B	HK380PPi	HK380PPi-B	HK580PPi	HK580PPi-B	HKH2Oi
Breaking strength	Meridian	KN/m	ISO 10319-2015	50	50	70	70	70	90	90	70	70	90	90	90
	zonal			50	65	70	60	50	80	85	80	90	105	105	90
Elongation at break	Meridian	%	ISO 10319-2015	10	10	10.5	10	10.5	10	10	13	13	14	14	13
	zonal			8	8	8	8	8	8	8	9	9	9	9	9
Breaking strength at elongation 2%	Meridian	KN/m	ISO 10319-2015	13	13	15	15	15	18	18	10.5	9.5	8	7	9
Breaking strength at elongation5%	Meridian	KN/m	ISO 10319-2015	30	30	38	38	38	45	45	30.6	25	22	25	28
Mass per unit		g/m2	GB/T13762-1992	225	250	310	280	260	375	380	340	345	420	435	430
Static breaking strength（CBR）		KN	GB/T 14800-2010	6	6.5	8	8	7	9	10	9	9	10	10	11
Equivalent aperture（O90）		mm	GB/T 14799-2005	0.42	0.45	0.48	0.48	0.33	0.45	0.4	0.48	0.48	0.47	0.48	0.45
permeability（Q50）		L/m2/s	GB/T 15789-2005	33	28	57	55	54	45	42	58	59	58	52	18
UV resistance（500 hour strong preservation rate）		%	ASTM D4355-2014	90	90	90	90	90	90	90	90	90	90	90	/