Home page

Distributed load HDPE Geocell

Geocell is a flexible three-dimensional, honeycomb like structures made from high-density polyethylene(HDPE) strips which are ultrasonically bonded together to form an extremely strong configuration.

Commodity name： Distributed load HDPE Geocell

Category:

Email:

Description

Introduction

A geosynthetic cellphone is a third-dimensional structure made of polymer materials, forming one or greater honeycomb like lattice areas inner it. Its most necessary characteristic is to structure a reinforced, reinforced, and consistent form in the soil. The following are the integral facets of the geotechnical cell

Strengthening soil: Geogrids can supply splendid reinforcement and resource via developing the tensile and shear electrical energy of the soil. It kinds a rigid structural framework in the soil, which can face up to lateral displacement of the soil, extend the normal electrical energy and stability of the soil.

Distributed load: The grid like structure of the geogrid can evenly distribute the load all via the complete soil, reducing the centred stress influence of the load on the soil. It can reduce the hazard of settlement and deformation of engineering structures, and preserve the stability and uniformity of soil.

Video Showcase

Applications

Therefore, geogrids are widely used in fields such as roads, railways, water conservancy, embankments, mines, and environmental engineering

Working Drawing

Provide a permeable path: The honeycomb structure of the geogrid provides a channel and permeable path for water. It can effectively drain and reduce water accumulation in the soil, beautify soil permeability and erosion resistance.

Protecting soil and stopping erosion: Geogrids can play a characteristic in defending soil, stopping soil erosion and erosion. It can shape a protecting layer to stop the erosion of soil by way of the usage of water currents and waves, and maintain the integrity and stability of the soil.

Slope and economic group protection engineering: Geogrids are commonly used in slope and economic group protection engineering. It can be used to provide a raise to slopes and riverbanks, stop soil landslides and collapses, and provide a tightly closed soil floor to stop water waft and wave erosion.

Properties	TestMethod	Unit	Value
Polymer		-	HDPE
Density	ASTM D1505	g/cm3	0.94
Carbon black content	ASTM D1603	%	1.5
Sheet thickness (Smooth)	ASTM D5199	mm	1.1or1.2
Sheet thickness (Textured)	ASTM D5199	mm	1.5
Seam peel strength	Celldepth
		N	75mm	1060
		N	100mm	1420
		N	150mm	2130
		N	200mm	2840
Weld spacing		mm	330	356	400	445	660	712
Expanded cell size (WxL)		mm	244X203	259X224	295X250	320X287	488X408	508X475
Expanded panel size (WxL)		m	2.44X6.15	2.56X6.52	4X5	2.56X8.35	2.44X12.29	2.56X13.72
Expanded panel area		m2	15	16.7	20	21.4	30	35.12