Home page

Geogrid Supplier Best Quality PP Biaxial Geogrid for Road Construction

Polyester biaxial geogrid is manufactured from high tenacity multifilament polyester yarns and coated with durable polymer, it is used to stabilize the earth structures, such as road, highway, railway, airport, MSE wall, steep slope and pavement construction.

Commodity name： Geogrid Supplier Best Quality PP Biaxial Geogrid for Road Construction

Category:

Email:

Description

Introduction

Biaxial Plastic Geogrid for Construction
Geogrid is made of excessive polymer, which is extruded the skinny sheet, then rushed the normal mesh and two methods extension. This fabric has a high tensile strength, so it can additionally furnish the perfect pressure undergo and unfold of the interlock structures for the soil, appropriate for giant place everlasting load-bearing of groundwork.

Biaxial geogrids have been utilized in pavement building and soil stabilization initiatives at some stage in the worldwide.Biaxial Geogrid is Strata's revolutionary geogrid that is made from extruded polypropylene which offers most excellent stiffness, aperture balance and interlock abilities for structural reinforcement of paved and unpaved roads.

Video Showcase

Applications

Increase the bearing ability of the roadbed and basis and lengthen their carrier life.
Prevent avenue floor and basis from sinking or flawing, preserve easy and stunning floor surface.
Convenient building saves time and labor, minimize mounting time and reduce protection expense.
Prevent culverts from flawing.
Enhance earth slope and forestall water loss and soil erosion.
Decrease underlayer thickness and retailer manufacturing cost.
Enhance the balance of facet slope turf internet patch to enhance greening.
Replace wire netting used in mine as intermediate ceiling netting.

Working Drawing

Specifications

Item	Test Method	Unit	PBX1515		PBX2020		PBX3030		PBX4040		PBX5050
Item	Test Method	Unit	MD	TD	MD	TD	MD	TD	MD	TD	MD	TD
Polymer	-	-	PP
Minimum Carbon Black	ASTM D 4218	%	2
Tensile Strength	ASTM D 6637	kN/m	15	15	20	20	30	30	40	40	50	50
Tensile Strength @ 2% Strain	ASTM D 6637	kN/m	5	5	7	7	10.5	10.5	14	14	17.5	17.5
Tensile Strength @ 5% Strain	ASTM D 6637	kN/m	10.5	10.5	14	14	21	21	28	28	35	35
Elongation	ASTM D 6637	%	13	13	13	13	13	13	13	13	13	13
Junction Efficiency	GRI GG2	%	93	93	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D 7748	mg-cm	250,000		750,000		2,000,000		4,800,000		8,000,000
Aperture Stability	ASTM D 7864	m-N/deg	0.32		0.50		0.75		0.98		1.10
Aperture Size	-	mm	38	38	38	38	36	36	35	35	33	33
Roll Width	-	m	3.95 or 5.95
Roll Length	-	m	50