Home page

Fiberglass Geogrid Used for Airport Runway/Soft Soil Foundation Reinforcement

Fiberglass geogrid is knitted by glass fiber filaments and coated with bitumen to provide a good bond with the asphalt layers, can strengthen the asphalt layer, extend the service life of pavement layers and decrease the occurrence rate of reflective cracking under cyclic traffic load.

Commodity name： Fiberglass Geogrid Used for Airport Runway/Soft Soil Foundation Reinforcement

Category:

Email:

Description

Introduction

Fiberglass Geogrid is based totally on basalt fiber woven material and covered by means of molecular liquid immersion.Widely used in constructing walls, hearth prevention, warmness preservation, cracking, etc., its more than a few homes are higher than glass fiber.It has properly alkalinity,
flexibility and longitude and weft tensile force.It is a non-metallic inorganic fiber, displaying golden brown, with mechanical
properties of non-combustible, environmental safety (low carbon material), temperature, strength, longevity and small shrinkage.The pavement anti-crack cloth with energy and crack overall performance is shaped via the manner of soaking pulp and warp knitting reinforcement.

Video Showcase

Applications

1. Used in surface reinforcement of highway, railway and airport road;
2. Used for the maintaining, re-construction and broaden of the old road surface
3. Used for reinforcement of irrigation channels and river dams.
4. Used to strengthen bridge connecting surface.

Working Drawing

1. Reinforcement and Stabilisation of earth fencing walls, railways, highways and water conservation projects;

2. Reinforcement of street foundations;

3. Retaining walls;

4. Road slope restore and reinforcement;

5. Be used in noise limitations construction.

Specifications

Specification		EGA30-30	EGA50-50	EGA80-80	EGA100-100	EGA120-120
Mesh size (mm)		25.4×25.4 Or 12.5×12.5
Breaking strength ≥（KN/m）	Warp direction	30	50	80	100	120
	Across warp	30	50	80	100	120
Elongation at break ≤（%）	Warp direction	3
	Across warp	3
Elasticity modulus(GPA)		67
Thermal tolerance		-100~280℃
Width		1~6m