Home page

30kn/M Composite Geotextile PP Biaxial Geogrid for Road Base

Polyester biaxial geogrid is manufactured from high tenacity multifilament polyester yarns and coated with durable polymer, it is used to stabilize the earth structures, such as road, highway, railway, airport, MSE wall, steep slope and pavement construction.

Commodity name： 30kn/M Composite Geotextile PP Biaxial Geogrid for Road Base

Category:

Email:

Description

Introduction

The properties of Biaxial Geogrids, made of Polypropylene (PP) with their square apertures, high tensile strength and optimised geometry of nodes and ribs make them equal to any other similar material. The reinforcing action of PP Biaxial Geogrids lies mainly in confining soil and increasing its shearing resistance by a process of interlocking between the square ribs and the soil. The load dispersal effect from the interlocking mechanism is highly effective and can reduce sub-base thickness and construction cost. PP Biaxial Geogrids can be used with any kind of mechanical fill material. Two aperture size ranges are available for optimum matching with project fill.

Video Showcase

Applications

1.Enhance the bearing capacity of road foundation and extend the duration of roads.
2.Prevent road surface from collapse, crack and being dirty.
3.Be convenient for construction, timesaving and cut down the cost of maintenance.
4.Prevent tunnel from crack occurring.
5.Further solidity slopes to proof water and soil from losses.
6.Reduce the surface thickness of the ground.
7.Consolidate the net for growing grass on the slopes so as to stabilization surrounding virescence.
8.Be used for artificial top net of mines instead of metal ones.It is of fire-retardant and anti-statics.

Working Drawing

Specifications

Item	Test Method	Unit	PBX1515		PBX2020		PBX3030		PBX4040		PBX5050
Item	Test Method	Unit	MD	TD	MD	TD	MD	TD	MD	TD	MD	TD
Polymer	-	-	PP
Minimum Carbon Black	ASTM D 4218	%	2
Tensile Strength	ASTM D 6637	kN/m	15	15	20	20	30	30	40	40	50	50
Tensile Strength @ 2% Strain	ASTM D 6637	kN/m	5	5	7	7	10.5	10.5	14	14	17.5	17.5
Tensile Strength @ 5% Strain	ASTM D 6637	kN/m	10.5	10.5	14	14	21	21	28	28	35	35
Elongation	ASTM D 6637	%	13	13	13	13	13	13	13	13	13	13
Junction Efficiency	GRI GG2	%	93	93	93	93	93	93	93	93	93	93
Flexural Rigidity	ASTM D 7748	mg-cm	250,000		750,000		2,000,000		4,800,000		8,000,000
Aperture Stability	ASTM D 7864	m-N/deg	0.32		0.50		0.75		0.98		1.10
Aperture Size	-	mm	38	38	38	38	36	36	35	35	33	33
Roll Width	-	m	3.95 or 5.95
Roll Length	-	m	50