Home page

100/200 Kn High Strength Fiberglass Geogrid

Fiberglass geogrid is knitted by glass fiber filaments and coated with bitumen to provide a good bond with the asphalt layers, can strengthen the asphalt layer, extend the service life of pavement layers and decrease the occurrence rate of reflective cracking under cyclic traffic load.

Commodity name： 100/200 Kn High Strength Fiberglass Geogrid

Category:

Email:

Description

Introduction

Fiberglass geogrid is a kind of plane network shape material that selects excellent reinforcement non-alkali fiberglass yarn. It is weaven in to base material by using foreign advanced warp knitter and adopts warp knitted directional structure, It make full use of yarn strength in textile, improves its chemical performance and makes it have good tension resistance, tearing resistance and creep resistance and is formed by excellent modified asphalt coating treatment. It follows similar and compatible principle, lays stress on its synthetic performance with asphalt mixture, protects glass fiber base material full and improve wearing resistance and sharing force resistance of base material so as to make road surface reinforce, to prevent highway harm such as crack and rut from occurring and to solve the problem that asphalt rode surface is difficult for reinforcement.

Video Showcase

Applications

1. The historic asphalt concrete pavement is strengthened to give a boost to the asphalt floor layer to stop diseases.

2. The cement concrete pavement is transformed into a composite pavement to suppress reflection cracks brought about by using plate shrinkage.

3. Road extension and enchancment challenge to stop cracks precipitated by using the junction of new and historical and uneven settlement.

4. Reinforcement cure of gentle soil basis is conducive to the consolidation of tender soil water separation, efficiently inhibits settlement, uniform stress distribution, and enhances the typical power of the roadbed.

5. The semi-rigid base of the newly constructed street produces shrinkage cracks, and the reinforcement is bolstered to forestall the pavement cracks triggered by means of the reflection of the base cracks.

Working Drawing

Specifications

Specification		EGA30-30	EGA50-50	EGA80-80	EGA100-100	EGA120-120
Mesh size (mm)		25.4×25.4 Or 12.5×12.5
Breaking strength ≥（KN/m）	Warp direction	30	50	80	100	120
	Across warp	30	50	80	100	120
Elongation at break ≤（%）	Warp direction	3
	Across warp	3
Elasticity modulus(GPA)		67
Thermal tolerance		-100~280℃
Width		1~6m