Home page

bitumen coated fiberglass geogrid 100/100KN composite pp geotexile130g

Fiberglass geogrid is knitted by glass fiber filaments and coated with bitumen to provide a good bond with the asphalt layers, can strengthen the asphalt layer, extend the service life of pavement layers and decrease the occurrence rate of reflective cracking under cyclic traffic load.

Commodity name： bitumen coated fiberglass geogrid 100/100KN composite pp geotexile130g

Category:

Email:

Description

Introduction

Fiberglass geogrid is a kind of geosynthetic cloth used for soil reinforcement and floor stabilization. It is made from high-strength fiberglass yarns that are covered with a polymer resin for introduced durability. This geogrid is designed to enhance the load-bearing potential of soils, forestall soil erosion, and decrease agreement of foundations.

Fiberglass geogrids are many times used in civil engineering purposes such as avenue construction, maintaining walls, and slope reinforcement. They are lightweight, convenient to install, and have excessive tensile electricity properties, making them an perfect answer for strengthening vulnerable soils and enhancing standard stability. By incorporating fiberglass geogrid into building projects, engineers can make sure long-lasting and dependable infrastructure that can stand up to the check of time.

Video Showcase

Applications

Environmental Protection: Fiberglass Geogrid is used in the field of environmental protection for applications such as soil erosion control and slope stability.
Mining: In mining, Fiberglass Geogrid is used to reinforce and stabilize the soil in mining areas, preventing landslides and erosion.
Soft foundation reinforcement: Fiberglass Geogrid is used for the reinforcement of soft soil foundations to improve their bearing capacity and stability.
Asphalt pavement reinforcement: Fiberglass Geogrid is used to enhance asphalt pavement, improve its crack resistance and durability.
Embankment and retaining wall: In the construction of embankments and retaining walls, Fiberglass Geogrid is used to improve the stability and bearing capacity of the structure.
Reinforcement of fill and stone: Fiberglass Geogrid is used for reinforcement of fill and stone to prevent slippage and settlement.
Enhancement of geosynthetic materials: Fiberglass Geogrid is used as a geosynthetic material to enhance the bearing capacity and deformation resistance of soil.
Reinforcement and deformation assessment of large geological structures: Fiberglass Geogrid is used for reinforcement and deformation assessment of large geological structures, such as slopes, roadbeds, etc.

Working Drawing

Specifications

Specification		EGA30-30	EGA50-50	EGA80-80	EGA100-100	EGA120-120
Mesh size (mm)		25.4×25.4 Or 12.5×12.5
Breaking strength ≥（KN/m）	Warp direction	30	50	80	100	120
	Across warp	30	50	80	100	120
Elongation at break ≤（%）	Warp direction	3
	Across warp	3
Elasticity modulus(GPA)		67
Thermal tolerance		-100~280℃
Width		1~6m